2019 - 2020
Florida Department of Education
Curriculum Framework 

Program Title:	Telecommunication Engineering Technology
Career Cluster:	Arts, A/V Technology and Communication

AS	
CIP Number	1615030302	
Program Type	College Credit	
Standard Length	64 credit hours	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	49-2022 – Telecommunications Equipment Installers and Repairers, Except Line Installers	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	

Purpose

This program is designed to prepare students for employment as communications engineering technicians, television technicians, analysis technicians, 2-way cellular wireless technicians, network technicians, network operations specialists, product specialists, I.P. (Internet Protocol) engineers, technical salespersons, field engineers, field technicians, transmission engineers, technical support salespersons, installer/repair technicians, network engineers, or in related occupations. This program may also provide supplemental training to persons previously or currently employed in these occupations.  

This specialization content includes, but is not limited to, basic electronics skills, transmission and distribution systems, telephony communication systems, digital communications, data communications and network communications.

This program focuses on broad, transferable skills and stresses understanding and demonstration of the following elements of the Telecommunication Engineering industry: planning, management, finance, technical and product skills, underlying principles of technology, labor issues, community issues and health, safety, and environmental issues.

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Arts, A/V Technology and Communication career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Arts, A/V Technology and Communication career cluster. 

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of 64 credit hours.

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Demonstrate knowledge of basic electronics.
02.0	Demonstrate proficiency in basic operation and application of transmitters, receivers, and transmission and distribution systems.
03.0	Demonstrate proficiency in design and analysis of digital communications systems.
04.0	Demonstrate proficiency in the analysis of transmission and distribution systems.
05.0	Demonstrate proficiency in network communications.
06.0	Demonstrate proficiency in the analysis of telephony communication systems.
07.0	Demonstrate proficiency in the analysis of analog and digital video systems.

2019 - 2020
Florida Department of Education
Student Performance Standards

Program Title:	Telecommunication Engineering Technology
CIP Number:	1615030302
Program Length:	64 credit hours
SOC Code(s):		49-2022

Refer to Rule 6A-14.030 (4), F.A.C., for the minimum amount of general education coursework required in the Associate of Science (AS) degree.  At the completion of this program, the student will be able to:	
01.0	Demonstrate knowledge of basic electronics – the student will be able to:	
01.01	Perform various types of soldering.	
01.02	Perform various types of wiring and cable terminations.	
01.03	Demonstrate knowledge of AC/DC concepts and applications.	
01.04	Demonstrate knowledge of computer systems and basic applications.	
01.05	Demonstrate use of basic test and measurement equipment.	
01.06	Understand and demonstrate safety rules.	
01.07	Demonstrate understanding of digital fundamentals.	
02.0	Demonstrate proficiency in basic operation and application of transmitters, receivers, and transmission and distribution systems – the student will be able to:	
02.01	Describe the principles and operation of amplitude modulation and frequency modulation.	
02.02	Demonstrate understanding of block diagrams and components of transmitter receiver circuits including mixers, IF amplifiers, local oscillators, modulators and demodulators.	
02.03	Identify, measure, analyze and troubleshoot AM and FM transmitter/receiver circuits including mixers, IF amplifiers, local oscillators, modulators, demodulators and speech amplifiers.	
02.04	Analyze, troubleshoot, and maintain transmitters and receivers, to include heterodyning, frequency synthesis, phase-locked-loop, filtering and automatic control circuits.	
02.05	Analyze, troubleshoot and adjust RF power amplifier circuits.	
02.06	Describe the operation of Double Side Band (DSB) and Single Side Band (SSB) radio systems.	
02.07	Identify the stages of SSB and DSB transmitter and receiver circuits.	
02.08	Design, analyze and troubleshoot SSB and DSB transmitter and receiver circuits.	
02.09	Conduct operating system checks and make minor adjustments to SSB and DSB transmitters and receivers.	
02.10	Analyze and test AM, SSB and DSB radio circuits using spectrum analyzers, noise analyzers, impedance meters, sweep generators, distortion meters and power meters.	
02.11	Analyze, adjust and troubleshoot Phase Modulation (PM) circuits.	
02.12	Analyze, adjust and troubleshoot FM transceiver circuits.	
02.13	Test, adjust and align transmitters and receivers using the spectrum analyzer, sweep generator, noise analyzer, frequency meter, modulation meter, Impedance Bridge and power meter.	
02.14	Describe the components and concepts of transmission systems: antennas, fiber optics, coax, copper, microwave, satellite, feed lines, and wave guides.	
02.15	Calculate transmission line characteristics and understand impedance matching.	
02.16	Analyze and describe the concepts of radio wave propagation and radiation fields.	
02.17	Test, set up and adjust antenna systems using a power meter, network analyzer, and SWR meter.	
02.18	Describe government rules, regulations, and permits.	
03.0	Demonstrate proficiency in design and analysis of digital communication systems – the student will be able to:	
03.01	Describe digital modulation techniques and systems.	
03.02	Describe industry standards in digital communications.	
03.03	Analyze, measure, and troubleshoot digital modulation systems.	
03.04	Perform specific test and measurement as related to the digital devices and equipment.	
03.05	Analyze and evaluate the operation of programmable digital filters.	
03.06	Describe the operation and application of compression amplifiers.	
03.07	Analyze and describe the operation of compander circuits.	
03.08	Describe and analyze the operation of a sample and hold circuit.	
03.09	Describe the conversion of analog signals into a digital format.	
03.10	Describe and analyze the operation of Pulse Code Modulation (PCM) circuits.	
03.11	Describe, analyze and evaluate the operation of a Coder/Decoder (CODEC) IC circuit.	
03.12	Describe, analyze and evaluate the operation of a continuously variable slope delta modulation circuit.	
04.0	Demonstrate proficiency in the analysis of transmission and distribution systems – the student will be able to:	
04.01	Analyze and demonstrate the application of optical electronic devices in power control circuits and in analog, digital and data communication circuits.	
04.02	Analyze and demonstrate the operation of optical devices.	
04.03	Splice and terminate cabling systems.	
04.04	Test and evaluate modulators and demodulators.	
04.05	Analyze and demonstrate multiplex transmission including use of full and half duplex communications.	
04.06	Describe gain and loss concepts as applied to transmission and distribution systems.	
04.07	Describe the fundamental concepts of satellite communications.	
04.08	Operate satellite communication systems.	
04.09	Operate multiplexed data telemetry systems.	
04.10	Analyze the theoretical concepts that define antenna equivalent circuits and couplers.	
04.11	Perform and analyze the calculations required to evaluate the effectiveness of antennas.	
05.0	Demonstrate proficiency in network communications – the student will be able to:	
05.01	Describe the layers of a communications system.	
05.02	Describe the protocol requirements necessary to ensure the transmission of a data message.	
05.03	Describe, from a system standpoint, the characteristics of serial communications standards.	
05.04	Analyze and troubleshoot communications between computers.	
05.05	Compare serial communications with parallel and other standards.	
05.06	Describe, analyze, troubleshoot and demonstrate the operation of network access devices.	
05.07	Demonstrate use of network management system.	
05.08	Identify the capabilities of a telephone circuit on a data communications system.	
05.09	Describe LAN topologies as applied to data networks.	
05.10	Design, connect and troubleshoot a Local Area Network (LAN).	
05.11	Describe WAN topologies as applied to data networks.	
05.12	Design, connect and troubleshoot a Wide Area Network (WAN).	
05.13	Describe wireless topologies as applied to data networks.	
05.14	Design, connect and troubleshoot a wireless network.	
05.15	Fabricate and test LAN cabling.	
05.16	Describe the operation of a short-range wireless network (i.e. Blue Tooth, IEEE802.11).	
05.17	Describe the operation of a long-range wireless network (i.e. PCS, digital messaging, 3G Technology).	
05.18	Describe the operation of a cellular communications network.	
05.19	Describe and analyze error detection and correction methods used in data communication systems.	
05.20	Describe basic data firewalls, encryption and decryption methods.	
05.21	Demonstrate understanding of compression and decompression.	
05.22	Describe the general characteristics and operations of frame relay, DSL, and ISDN as they apply to data networks.	
05.23	Describe the characteristics of frame relay network management.	
05.24	Describe the general characteristics and operations of routers and switches as they apply to data networks and systems.	
05.25	Describe the general characteristics and design capabilities of the T-carrier system.	
05.26	Analyze the network design criteria of T-1 systems.	
05.27	Describe the general characteristics and design capabilities of the Synchronous Optical Network (SONET).	
05.28	Describe the characteristics and design capabilities of the Asynchronous Transfer Mode (ATM) network.	
05.29	Describe the characteristics of high-speed public data networks.	
05.30	Apply the theory of wide area network design to systems.	
06.0	Demonstrate proficiency in the analysis of telephony communication systems – the student will be able to:	
06.01	Describe the general characteristics of a telephone subscriber loop.	
06.02	Describe, demonstrate and analyze the operation of tone dialing, DTMF (Dual Tone Multi Frequency), pulse dialing and ringing circuits.	
06.03	Describe, evaluate and analyze the operation of a MODEM in the originate and answer modes.	
06.04	Describe the various functions of a BORSCHT (Battery Overload Ring Supervision Coding Hybrid Test) circuit.	
06.05	Describe, evaluate and analyze the operation of a Subscriber Loop Interface Circuit (SLIC).	
06.06	Describe, evaluate and analyze the operation of a Time-Slot Assignment Circuit (TSAC).	
06.07	Describe and evaluate the application of fiber optic systems to telecommunications.	
06.08	Analyze and describe applications of speech synthesis and recognition circuits to telecommunications.	
06.09	Terminate and test telephony cable.	
06.10	Describe the operation of an integrated voice and data system.	
07.0	Demonstrate proficiency in the analysis of analog and digital video systems – the student will be able to:	
07.01	Describe the fundamental principles and concepts of television/video systems.	
07.02	Describe the operation of the key components of a television/video system.	
07.03	Describe the principles of NTSC and HDTV video signals.	
07.04	Analyze and describe the operation of the various sections of a DTV transmitter.	
07.05	Analyze and describe the characteristics of the television signal (analog, digital, RF).	
07.06	Describe and analyze the operation of the various sections of an NTSC and DTV receiver.	
07.07	Analyze and describe the operation of encoders and decoders.	
07.08	Assemble and test cables and connectors related to video/audio systems.	
07.09	Demonstrate proficiency in the use of video and audio test equipment.	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization(s) providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities to meet individual needs and ensure equal access. Postsecondary students with disabilities must self-identify, present documentation, request accommodations if needed, and develop a plan with their counselor and/or instructors. Accommodations received in postsecondary education may differ from those received in secondary education. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

Certificate Programs

A College Credit Certificate consists of a program of instruction of less than sixty (60) credits of college-level courses, which is part of an AS or AAS degree program and prepares students for entry into employment (Rule 6A-14.030, F.A.C.).  This AS degree program includes the following College Credit Certificates:

Cable Installation (0647010304) – 12 credit hours
Television System Support (0609040205) – 24 credit hours
Network Communications (LAN) (0611100206 – 18 credit hours
Network Communications (WAN) (0611100207) – 18 credit hours
Wireless Communications (0615030508) – 18 credit hours

Standards for the above certificate programs are contained in separate curriculum frameworks.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:
http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml